Re: [SAGE] can't set commitpeding on sun X4100 Integrated Lights Out Manager (ILOM)

[Dan Foster <sage@evilphb.org>]

Hot Diggety! Clay Ye was rumored to have written:
> 
> -> set /SP/network commitpending = true
> set: Invalid command syntax
> Usage: set [target] <property>=value> [<property>=<value>...]

I'm not sure it matters, but try:

	set /SP/network commitpending=true

At risk of losing your settings, you might want to consider making ILOM
do a factory reset of the settings in case the properties data has
gotten somewhat corrupt, if the step above didn't help any.

You may also want to double check you have the latest firmware applied.

With the V20z, it was split into a BIOS firmware image and a SP firmware
image. Don't know about the X4100.

But if there are any bugs with the SP or ILOM, firmware images tend to
fix these kind of things.

-Dan